Cookies are used to make the most of our website. By logging in to this site you are deemed to accept the use of cookies. To learn more about cookies and our policy, please click on the link below.
SG515 Nc Surface Grinder
- Technical Detail
- Description
| SG515 Nc Surface Grinder | |
|---|---|
| Spindle Motor Power | 7,5 kW, 400 V |
| Table Dimensions | 500x1500 mm |
| Table Longitudinal Hydraulic Travel | 1600 mm |
| Table Transverse Manual Travel | 540 mm |
| Distance Between Spindle and Table | 590 mm |
| Table load capacity(max) | 700 Kg |
| T Channel Dimensions | 3x16 mm |
| Table Moving Speed | 5~25 m/min |
| Y Axis Handwheel Feed Line | 0,02 mm |
| Y Axis Handwheel One Turn | 5 mm |
| Automatic Y-axis Movement | 0,5~12 mm |
| Y-axis Rapid Speed | 1250 mm/min |
| Stone Dimensions, Diameter x Width x Hole Diameter | 355x40x127 mm |
| Spindle Speed | 1450 rpm |
| Y Axis Handwheel Feed Line | 0,001 mm |
| Z Axis Handwheel One Turn | 0,1 mm |
| Automatic down feed precision (rate) | 0,001~1 |
| Z-axis feeding speed | 210 mm/min |
| Hydraulic Motor Power | 2,2 Kw |
| Dust Collection Motor Power | 550 W |
| Cooling Engine Power | 90 W |
| Y-axis (Vertical) Motor Capacity | 370 W |
| Z-axis (Cross feed) Motor Capacity | 1,5 W |
| Verge Dimensions | 5810x2445 mm |
| Dimensions (L x W x H) | 4000x2285x2250 mm |
| Net Weight | 6000 Kg |
| Gross Weight | 7000 Kg |
SG515 NC
• Automatic cross feed with
precise step up to 0,001 mm
SIEMENS PLC control system
with touch screen and
servo motor drive for vertical
(Z-axis) feed
Standard Accessories
• Grinding wheel
• Grinding wheel flange
• Balancing stand
• Balancing shaft (arbor)
• Wheel dresser (diamond dresser)
• Anchor bolt
• Hydraulic oil tank
• Magnetic separator
• Magnetic table
• Cooling system
• Machine lamp
• Pads
• Operating Tools